Quick Specification
PAGE 11 OF 17 Product Specication Revised 2/20
For questions about your
appliance, please call 1-800-626-2000.
FLUSH INSET INSTALLATION
HELPFUL TIPS
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required. For 3/4" raised
panels, routing is required. e router
depth is 1/4" all the way around
the panel’s backs. Additional panel
width reductions are required per
the diagrams shown. is will create
“picture frame’ routing allowing the
panels to slide into the attached door,
drawer and grille trims.
MAXIMUM TOTAL PANEL
WEIGHT:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Grille panel – 11 lbs
NOTE: For panels constructed with
rails and stiles (5-panel), the rails
must be a minimum of 3" wide and
stiles must be a minimum of 4" wide.
DOOR HANDLES
Door handles not included. Custom
handles supplied by your cabinet
maker may be used.
Order ZKBFN720NII unification
kit for an integrated appearance on
2 custom panel models installed
side-by-side.
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
B
C
D
A B C D
38" 10 11/16" 46 9/16" 22 7/16"
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS SINGLE INSTALLATION
3/4" RAISED DOOR PANEL ROUTING
3/4"
11/32"
1/4"
1/4"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2-1/16"
2-1/16"
ROUTER DEPTH 1/4" ROUTER DEPTH 1/4"
1/4"
3/32"
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back