Quick Specs

NOTES
The 1/2" overlay panel must be
secured to a .10" spacer panel and
a 1/4" thick backer panel, which
slides into the trim.
Assemble the panels with glue
and screws:
• Center the spacer panel on the
backer panel, left to right and
top to bottom. Secure the panels
with glue.
• Refer to the chart for locating
the backer panel to the overlay
panel. Secure the overlay
panel to the backer panel with
glue and screws. Screws must
be countersunk into the
backer panel
Order ZUG2: Unified grille kit for
dual installation. Maximum total
panel weight – 25 lbs.
Note: For panels constructed with
rails and stiles (5-panel), the rails
must be a minimum of 3" wide
and stiles must be a minimum of
4" wide.
FLUSH INSET 1/2" PANEL DIMENSIONS
1/2" OVERLAY PANEL ROUTING DIMENSIONS
A B C D
1/4" Backer Panel 33 7/8" 8 7/8" 46 1/16" 21 7/8"
.10" Space Panel 32 1/2" 7 5/8" 44 11/16" 20 1/2"
1/2" Overlay Panel 38" 10 11/16" 46 9/16" 22 7/16"
A B C D
Fresh Food Panel 2 1/16" 2 1/16" 5/16" 3/16"
Freezer Panel 2 1/16" 2 1/16" 5/16" 3/16"
Grille Panel 2 1/16" 2 1/16" 1 11/16" 3/16"
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
B
C
D
PANEL DIMENSIONS
C
D
A B
Grille Back
C
D
A
B
Hinge Side
Backer with
Overlay Panel
Assembly
Door Panel Back
C
D
A
B
Freezer Drawer
1/2"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
PANEL DIMENSIONS
FLUSH INSET
INSTALLATION
ZIC360NHRHMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
Product Specification Revised 1/18