Quick Specs
ZIC360NHLHMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
Product Specification Revised 1/18
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
Fresh
Food
Panel
Freezer Drawer Panel
E
B
C
D
A B C D E
74 1/2" 10 11/16" 46 9/16" 22 7/16" 36 7/8"
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS DUAL INSTALLATION
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required. For 3/4" raised
panels, routing is required. The router
depth is 1/4" all the way around
the panel’s backs. Additional panel
width reductions are required per
the diagrams shown. This will create
“picture frame’ routing allowing the
panels to slide into the attached door,
drawer and grille trims.
Maximum total panel weight:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Unied grille panel – 25 lbs
Door Handles
Door handles not included.Custom
handles supplied by your cabinet
maker may be used.
ZKHPSS1: Professional tubular
stainless steel handle designed to
fit custom panels. Kit includes one
handle – 30-1/2" long. Order
2 kits from your Monogram supplier.
ZKHCSS2: Custom European tubular
handle designed to fit custom panels.
Kit includes 2 handles. Door handle is
44-3/16" and drawer handle is 33-3/16".
Order ZUG2: Unified grille kit for
dual installation. Maximum total panel
weight - 25 lbs.
ZKHCT: Handle side trim for left-hand
and right-hand door. For use on a
custom panel when using a custom
handle.
3/4" RAISED DOOR AND DRAWER PANEL ROUTING -
(SEE PAGE 5 FOR 3/4" GRILLE PANEL ROUTING DIAGRAMS)
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should be
finished as they may be visible
when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
HINGE
SIDE
HANDLE
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
3/16"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
2 1/16"
3/16"
ROUTER DEPTH 1/4"
DETAIL HINGE
SIDE
DETAIL HANDLE
SIDE
NOTES
FLUSH INSET
INSTALLATION