Quick Specs
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required. For 3/4" raised
panels, routing is required. The router
depth is 1/4" all the way around
the panel’s backs. Additional panel
width reductions are required per
the diagrams shown. This will create
“picture frame’ routing allowing the
panels to slide into the attached door,
drawer and grille trims.
A
A separate 115V, 60Hz, 15- or
20-amp power supply is
recommended for each product.
Maximum total panel weight:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Unied grille panel – 25 lbs
Door Handles
Door handles not included.Custom
handles supplied by your cabinet
maker may be used.
ZKHPSS1: Professional tubular
stainless steel handle designed to
fit custom panels. Kit includes one
handle – 30-1/2" long. Order
2 kits from your Monogram supplier.
ZKHCSS2: Custom European tubular
handle designed to fit custom panels.
Kit includes 2 handles. Door handle is
44-3/16" and drawer handle is 33-3/16".
Order ZUG2: Unified grille kit for
dual installation. Maximum total panel
weight - 25 lbs.
ZKHCT: Handle side trim for
left-hand and right-hand door. For
use on a custom panel when using
a custom handle.
The 1/2" overlay panel must be
secured to a .10" spacer panel and a
1/4" thick backer panel, which slides
into the trim.
Assemble the panels with glue and
screws:
• Center the spacer panel on the
backer panel, left to right and top to
bottom. Secure the panels with glue.
• Refer to the chart for locating the
backer panel to the overlay panel.
Secure the overlay panel to the
backer panel with glue and screws.
Screws must be countersunk into
the backer panel
FLUSH INSET 1/2" PANEL DIMENSIONS DUAL INSTALLATION
PANEL DIMENSIONS
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
Fresh
Food
Panel
Freezer Drawer Panel
E
B
C
D
A B C D E
1/4" Backer Panel 69 7/8" 8 7/8" 46 1/16" 21 7/8" 33 7/8"
.10" Space Panel 68 1/2" 7 5/8" 44 11/16" 20 1/2" 32 1/2"
1/2" Overlay Panel 74 1/2" 10 11/16" 46 9/16" 22 7/16" 36 7/8"
3/4" OR 1/2" DUAL INSTALLATIONS
ZIC360NHLH_ZIC360NHRH
75" (190.5)
Finished Width
26 3/16" (66.5)
Min. Cutout Depth
24 3/16" (61.4)
4 5/16"
(10.9)
5 1/2"
(13.9)
9"
(22.9)
85"
(215.9)
Finished
Opening
3 1/2"
(8.9)
W
FRONT VIEW
ELEC.
5 1/2"
(13.9)
9"
(22.9)
3 1/2"
(8.9)
15" (38.1) min
To wall
15" (38.1) min
To wall
1"
(2.5)
115˚
Door swing
115˚
Door swing
75 1/2"
(191.8 )
From floor
to bottom
of electrical
area
ELEC.
SIDE VIEW
7"
(17.8)
7"
(17.8)
WATER
3 1/2"
(9.0)
WATER
3 1/2"
(9.0)
7 1/2"
(19.1)
7 1/2"
(19.1)
A
ZIC360NHLHMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
NOTES
FLUSH INSET
INSTALLATION
Product Specification Revised 1/18