Quick Specs

The 1/2" overlay panel must be
secured to a .10" spacer panel and a
1/4" thick backer panel, which slides
into the trim.
Assemble the panels with glue and
screws:
• Center the spacer panel on the
backer panel, left to right and top
to bottom. Secure the panels
with glue.
• Refer to the chart for locating the
backer panel to the overlay panel.
Secure the overlay panel to the
backer panel with glue and screws.
Screws must be countersunk into
the backer panel
Order ZUG2: Unified grille kit for
dual installation. Maximum total
panel weight – 25 lbs.
Note: For panels constructed with
rails and stiles (5-panel), the rails
must be a minimum of 3" wide and
stiles must be a minimum of 4" wide.
FLUSH INSET 1/2" PANEL DIMENSIONS
1/2" OVERLAY PANEL ROUTING DIMENSIONS
A B C D
1/4" Backer Panel 33 7/8" 8 7/8" 46 1/16" 21 7/8"
.10" Space Panel 32 1/2" 7 5/8" 44 11/16" 20 1/2"
1/2" Overlay Panel 38" 10 11/16" 46 9/16" 22 7/16"
A B C D
Fresh Food Panel 2 1/16" 2 1/16" 5/16" 3/16"
Freezer Panel 2 1/16" 2 1/16" 5/16" 3/16"
Grille Panel 2 1/16" 2 1/16" 1 11/16" 3/16"
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
B
C
D
PANEL DIMENSIONS
C
D
A B
Grille Back
C
D
A
B
Hinge Side
Backer with
Overlay Panel
Assembly
Door Panel Back
C
D
A
B
Freezer Drawer
1/2"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
PANEL DIMENSIONS
ZIC360NHLHMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
NOTES
FLUSH INSET
INSTALLATION
Product Specification Revised 1/18