Quick Specs

OVERALL DIMENSIONS
AFTER PANEL INSTALL
ZIC360NHLHMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
Product Specification Revised 1/18
STANDARD
INSTALLATION
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall.
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 3/8" (64.5 cm)
Door Clearance 36 3/4" (93.4 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height
83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements
1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 640 lb (290.3 kg)
Dimensions in parentheses are in centimeters unless
otherwise noted. Actual product dimension may vary
due to manufacturing tolerances.
36" (91.5)
9 7/8"
(25.1)
25 1/4" (64.1)
23 7/8" (60.7)
1 7/8"
(4.8)
* 84"
(213.4)
46 1/4"
(117.5)
*73 1/4"
(186.1)
*26"
(66.0)
*26 1/2"
(16.5)
*24 1/8"
(61.3)
*3 5/8"
(9.2)
SIDE VIEWFRONT VIEW
* 83 1/2"
(212.1)
35" (89.0)
Case width
36 3/4"
(93.4)
TOP VIEW
ZIC360NXLH
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
** These refrigerators are equipped with a 3-position door stop. The factory-set 130° door
swing can be adjusted to 90° or 130° for standard installation if clearances to adjacent
cabinets or walls is restricted. Allow a 15" minimum clearance to wall for pan removal.
If the 90° door stop position is used, pan access is maintained, but pan removal is restricted.
** Allow 25" (63.5) min
clearance for 130˚
door swing
36" (91.5)
9 7/8"
(25.1)
25 1/4" (64.1)
23 7/8" (60.7)
1 7/8"
(4.8)
* 84"
(213.4)
46 1/4"
(117.5)
*73 1/4"
(186.1)
*26"
(66.0)
*26 1/2"
(16.5)
*24 1/8"
(61.3)
*3 5/8"
(9.2)
SIDE VIEWFRONT VIEW
* 83 1/2"
(212.1)
35" (89.0)
Case width
36 3/4"
(93.4)
TOP VIEW
ZIC360NXLH
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
** These refrigerators are equipped with a 3-position door stop. The factory-set 130° door
swing can be adjusted to 90° or 130° for standard installation if clearances to adjacent
cabinets or walls is restricted. Allow a 15" minimum clearance to wall for pan removal.
If the 90° door stop position is used, pan access is maintained, but pan removal is restricted.
** Allow 25" (63.5) min
clearance for 130˚
door swing