Specification Sheet
Product Specication Revised 10/19PAGE 4 OF 4
For questions about your
appliance, please call 1-800-626-2000.
NOTES
Backer side of
custom panel
3/4"
3/8"
3/4"
3/8"
7/8"
7/8"
Overlay Panel
Spacer Panel
Backer Panel
Note: Max assembled drawer panel wight is 25 lbs.
3/4" OVERLAY PANEL DIMENSIONS
(IN INCHES)
A (WIDTH) B (HEIGHT)
1/4" Backer 23 3/16" 29 9/16"
.10" Spacer 22 1/2" 29 1/16"
3/4" Overlay 23 5/8" 30"
• Assemble overlay panels with glue and screws
• Center spacer panel on the backer panel, left to right and top
to bottom. Secure the panels with glue.
• Center the spacer/bracket panel on the overlay panel. Secure
with glue and screws. Countersink screws into the backer panel.
• Max. assembled door panel weight is 25 lbs.
• e overlay panel must be secured to a 1/4"-thick backer
panel which slides into the trim. A .10"-thick spacer panel
must be placed between the custom and backer panel.
• Use a 3/4" router bit to cut a notch into the back side of the
assembled panel to allow for hinge clearance.
• A custom handle of your choice, supplied by your
cabinetmaker, must be installed on this overlay panel.
Countersink all screws into the backer panel. Screws cannot
protrude from the backer panel.
NOTES