Quick Specs

ZIBI240HIIMONOGRAM BAR REFRIGERATOR WITH ICEMAKER
Product Specification Revised 7/17
Assemble overlay panels with
glue and screws
Center spacer panel on the
backer panel, left to right and
top to bottom. Secure the
panels with glue.
Center the spacer/bracket
panel on the overlay panel.
Secure with glue and screws.
Countersink screws into the
backer panel.
Max. assembled door panel
weight is 25 lbs.
The overlay panel must be
secured to a 1/4"-thick backer
panel which slides into the trim.
A .10"-thick spacer panel must
be placed between the custom
and backer panel.
Use a 3/4" router bit to cut a
notch into the back side of the
assembled panel to allow for
hinge clearance.
A custom handle of your choice,
supplied by your cabinetmaker,
must be installed on this overlay
panel. Countersink all screws
into the backer panel. Screws
cannot protrude from the
backer panel.
NOTES
Note: Max assembled drawer panel wight is 25 lbs.
3/4" OVERLAY PANEL DIMENSIONS
(IN INCHES)
A (WIDTH) B (HEIGHT)
1/4" Backer 23 3/16" 29 9/16"
.10" Spacer 22 1/2" 29 1/16"
3/4" Overlay 23 5/8" 30"
Backer side of
custom panel
3/4"
3/8"
3/4"
3/8"
7/8"
7/8"
Overlay Panel
Spacer Panel
Backer Panel