ZHU30RSPSS, ZHU36RSPSS, ZHU30RDPBB, ZHU36RDPBB

49-2000868 Rev. 1 9

USING YOUR COOKTOP

SELECTING COOKTOP SETTINGS

Choose the element/burner that is best fit to the cookware

size. Each element/burner on your new cooktop has its

own power levels ranging from low to high. Power level

settings necessary for cooking will vary depending on the

cookware being used, the type and quantity of food, and

the desired outcome. In general use lower settings for

melting, holding and simmering and use higher settings for

heating quickly, searing and frying. When keeping foods

warm confirm selected setting is sufficient to maintain food

temperature above 140°F. Larger elements and elements

marked “Keep Warm” are not recommended for melting.

Hi is the highest power level, designed for large quantity

rapid cooking and boiling. Hi will operate for a maximum of

10 minutes. Hi may be repeated after the initial 10 minute

cycle by pressing the + pad.

CAUTION

Do not place any cookware, utensils or

leave excess water spills on control key pads. This may

result in unresponsive touch pads and turning off the

cooktop if present for several seconds.

boiling quickly

frying

searing

reducing

simmering

holding

melting

Low

SYNCHRONIZE LEFT ELEMENTS

NOTE: Sync Burners is only intended for cookware that spans both burners.

To Turn On

Touch the Sync Burners pad to connect the two

burners. Operate either element as previously described

to adjust power level.

To Turn Off

1. Touch the On/Off pad on either burner to turn off the

Sync Burners.

2. Touch the Sync Burners to turn both burners off.