Quick Specs

For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
OVERALL DIMENSIONS
PAGE 2 OF 4 Product Specication Created 12/20
ATTENTION ELECTRICIAN:
Rangetops must be supplied with 120V, 60Hz, and
connected to an individual, properly grounded branch
circuit protected by a 15 amp circuit breaker or
time-delay fuse.
SPECIFICATIONS
Overall Width 35 7/8" (91.1 cm)
Overall Depth 27 1/2" (69.8 cm)
Overall Height 8 1/2" (21.6 cm)
Volts/Hertz/Amps 120v; 60Hz; 15A
Net Weight 135 lbs (61.2 kg)
Approx. Shipping Weight 163 lbs (74 kg)
For more details refer to the installation instructions
for this product.
ZGU366NTSS
35-7/8" Width
27-5/8" to
Front of
Bullnose
8-1/2"
Height
8"
Countertop
Level
8-1/2"
Height
23-5/8"
**26-7/8"
To front of
control panel
29-1/8"
To front of control knobs
27-5/8"
To front of bullnose
Rear finished edge of the
control panel
6-1/2"
1/2"
Countertop
Level
†
3/16"
11/32"
1-3/16"
1"
5-1/4"
To pipe
stub center
7-1/4"
†
Include the overhang of the rear trim when countertop continues behind the product.
The overhang is decorative only. The weight of the rangetop is fully supported by the side trims.
** Maximum countertop cutout depth from the back of the rear trim to the back edge of chamfer at
the sides of the control panel - typically, the maximum countertop cutout depth (front to back).
Minimum countertop cutout depth is 25-1/4"