Installation Instructions
26 49-85246-1
The self-clean oven feature is designed to
make cleaning the inside of the oven easy by
using very high temperatures to burn away
food spills.
WARNING
Wipe up excess grease and
other food spills with a damp cloth. Excessive
food soils can ignite leading to smoke and
heat damage.
Ŷ Do not clean the oven seals, damage can
occur.
Ŷ Remove cookware, broiler pan, grid, probe
and any aluminum foil from the oven.
Ŷ Make sure the oven light lens and lens
frame are in place.
Ŷ Do not use commercial oven cleaners,
abrasives or oven protectors in or near the
self-cleaning oven.
Ŷ We recommend venting your kitchen with an
open window or using a ventilation fan/hood
during the self-clean cycle.
Ŷ Clean soil from around the frame and from
around the oven door, outside the oven
seals. These areas must be cleaned by hand.
Ŷ The oven racks may be left in the oven
during the self-clean cycle.
IMPORTANT: The health of some birds is
extremely sensitive to the fumes given off
during the self-cleaning cycle of any oven.
Move birds to another well-ventilated room.
NOTE: During the self-clean cycle, the
cooktop will be locked out and not functional.
If a surface burner is turned on after the self-
clean cycle has begun, a warning will be
displayed on the Oven Display “err turn surf
frnr off” and a beeping sound will be heard.
NOTE: Self-Clean will not work if the
temperature probe is plugged in or if the
Sabbath mode is set.
On double oven models, you can set a clean
cycle in both ovens at the same time. The last
oven set will automatically delay its start until
the end of the first oven’s clean cycle.
On double oven models, you can bake in one
oven and self-clean in the other at the same
time. However, you cannot use the PROOF
mode setting in one oven while the other oven
is self-cleaning.
Self-Cleaning Oven
Professional All-Gas Range
Self-cleaning
safety
precautions
How to
set the oven
for cleaning
1. Turn off all surface burners. (The CLEAN
cycle will not start until all surface burners
have been turned off.)
2. Turn the Oven Mode Selector to CLEAN.
3. Turn the Temperature knob to CLEAN.
The control automatically defaults to the
recommended clean cycle time of 5 hours.
The clean time may be adjusted to any
time between 3 and 5 hours using the Mini-
Knob. The display will show the actual time
remaining.
4. Push the Mini-Knob to start the CLEAN cycle.
If “CLOSE door” scrolls in the display, the
self-clean cycle has been selected but the
door is not closed. Close the oven door.
The symbol will flash as the oven door
is locked. It will not be possible to open the
oven door during the clean cycle.
5. After the clean cycle is complete and the
oven has cooled, “End” will show in the
display and the will turn off. Turn the
Oven Mode Selector and the Temperature
knob to OFF.
To interrupt a clean cycle, turn the Oven
Mode Selector and the Temperature knob
to OFF. When the oven has cooled to a
safe temperature, the
symbol will turn off
indicating the door may be opened.
An interrupted clean cycle cannot be
restarted until after the oven is cool enough
for the door to unlock.
Mini-Knob
Turn to adjust
Push to select