Owner's Manual

49-80822 23
Before you
call for service
Troubleshooting Tips
Wall Oven
Problem Possible Cause What To Do
Why is my
range making a
"clicking" noise
when using my
oven?
Your range has been designed to
maintain a tighter control over your
oven's temperature. You may hear
your oven's heating elements "click"
on and off more frequently than in
older ovens to achieve better results
during baking, broiling, convection, and
self-clean cycles.
This is normal.
Clock and timer
do not work
A fuse in your home may be blown or
the circuit breaker tripped.
Replace the fuse or reset the circuit
breaker.
Oven display sleep is turned on or
clock setting is turned off.
See the Special Features section.
Oven light does
not work
Light bulb is broken or defective. Call for service.
Pad operating light is broken. Call for service.
Oven will not
self-clean
The temperature is too high to set a
self-clean operation.
Allow the oven to cool and reset the
controls.
Oven controls improperly set. See the Cleaning the Oven section.
Excessive
smoking during
clean cycle
Excessive soil or grease. Turn both knobs to OFF. Open the
windows to rid the room of smoke. Wait
until the LOCKED light goes off. Wipe up
the excess soil and reset the clean cycle.
Excessive
smoking during
broiling
Food too close to burner element. Lower the rack position of the food.
Oven door will
not open after a
clean cycle
Oven too hot. Allow the oven to cool below locking
temperature.
Oven not clean
after a clean
cycle
Oven controls improperly set. See the Cleaning the Oven section.
Oven was heavily soiled. Clean up heavy spillovers before starting
the clean cycle. Heavily soiled ovens may
need to self-clean again or for a longer
period of time.
"DOOR
"
flashes in the
display
The self-clean cycle has been selected
but the door is not closed.
Close the oven door. Wait for oven door to
finish locking.
"DOOR
" will flash while the oven
door is locking to start self-clean and
steam clean.
This is normal.
"DOOR " light
is on when you
want to cook
The oven door is locked because
the temperature inside the oven
has not dropped below the locking
temperature.
Allow the oven to cool.
“F— and a
number or
letter” flash in
the display
You have a function error code. Press the mini knob. Allow the oven to
cool for one hour. Put the oven back into
operation.
If the function code repeats. Disconnect all power to the oven for at
least 30 seconds and then reconnect
power. If the function error code repeats,
call for service.