Specifications

Product Specification Revised 5/19
MONOGRAM 30" BUILT-IN SINGLE OVEN ZET1SHSS
2" (5.1) min
2 1/2"
(6.4 ) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
31 1/4"
(79.4) min
27 1/4"
(69.2)
ZET1SHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC ELEC
ELEC
Wall oven
Cooktop
GAS
ELEC
Wall oven
2" (5.1) min
2 1/2"
(6.4 ) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
31 1/4"
(79.4) min
27 1/4"
(69.2)
ZET1SHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC ELEC
ELEC
Wall oven
Cooktop
GAS
ELEC
Wall oven
NOTES
INSTALLATION WITH ADVANTIUM
AND WARMING DRAWER
SIDE BY SIDE INSTALLATION
A
Dimensions per
Advantium or Microwave
Oven requirements
B
Dimension per Warming
Drawer requirements
C
Note this oven is only
approved to be installed
under specific models
as labeled on this unit.
D
Support platform made
of 3/4" (1.9 cm) wood
is required. Must be
capable of supporting
220 lbs (99 kg). Support
Platform base to be
same height as
toe kick.
E
Junction box location
for wall oven. (May
also be located in
adjacent cabinet).
F
Gas regulator and
electric connections
for cooktops must be
located in an adjacent
accessible location to
the right
G
Top and/or side fillers
may be necessary if unit
is positioned between
existing cabinets. Be
sure they are attached
securely, since they will
anchor the oven in
the cabinet.
H
For flush oven
installations, the
cooktop cutout must be
set back 2 1/2" (6.4) plus
the cleat setback.
I
Dimension varies based
on model. Example:
ZGU36 5 1/2" (14.0)
from wall ZGU30
4 5/16" (11.0)
J
Dimension varies based
on model. Example:
ZGU36 0" (centerline)
ZGU30 12 1/16" (30.6)
(centerline)
K
Dimension varies based
on model. Example:
ZGU36 5 1/2" (14.0),
requires use of 90° 1/2"
FPT x 1/2" FL brass
street elbow
ZGU30 5" (12.7)
L
Minimum 31 1/4" from
the top surface of the
countertop to the top
surface of the wall oven
support platform when
installed beneath a
certified cooktop.
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
UNDER COOKTOP INSTALLATION
H
I
D
C
J
L
F
G
23 1/2" (59.7) min
cutout depth
27 1/4"
(69.2)
32 1/2" (82.6)
Recommended and
16 1/4" (41.3) min
Cutout location
from floor
2"
(5.1) min
2"
(5.1) min
STANDARD
INSTALLATION
STANDARD INSTALLATION
SIDE VIEW
ZET1FHSS
A
B
E
K