Installation Guide

31-2001053 Rev. 0 21
Installations
1 O
HEARTH OVEN OVER WARMING DRAWER –STANDARD INSTALLATION
WITH A 2” PLATFORM BETWEEN
A
45” is the required minimum installation height. Oven
may be installed higher based on owner preference.
B
Hearth Oven Platform must be able to support
200 lbs. (91kg).
C
Solid enclosure required on the top, bottom, left
side, right side and back. The back surface may
be drywall. Advanced fabrication and assembly
techniques are strongly encouraged to ensure
precise cabinet squareness and parallelism.
D
Junction box location: Must be flush with back
surface so as not to extend into the 23 ½ inch
cabinet depth. Junction box may also be located in
an adjacent cabinet.
E
A minimum 1/8” reveal BEYOND the OVERLAP
dimensions is recommended for proper drawer and
door operating clearance.
F
Exterior cleats may be added to the sides and top
of the Hearth Oven opening in order to bring the
front surface of the Hearth Oven into alignment with
the front surface of the wall oven below. Finish per
customer requirements. A flat black finish may better
match the side appearance of the oven below.
G
The opening center line dimension is taken at the
FRONT OPENING of each enclosure.
ELEC.
SEE NOTE D
HEARTH OVEN PLATFORM
SEE NOTE B
4
1
2
"
10"
5
16
"
OVERLAP
1
1
16
"
OVERLAP
11
16
"
OVERLAP
11
16
"
OVERLAP
1
1
16
"
OVERLAP
7
8
"
SEE NOTE F
1
2
"
SEE NOTE F
1
2
"
SEE NOTE F
28
1
2
"
CUTOUT WIDTH
28
1
2
"
CUTOUT WIDTH
1
4
"
CLEAT
2"
BETWEEN
CUTOUTS
2
1
2
"
CLEAT DEPTH
23
1
2
"
CABINET DEPTH
3
8
"
SEE NOTE F
22
9
16
"
9
1
4
"
SECTION A-A
17 29/32"
C
L
TO
C
L
SEE NOTE G
45"
MIN
A
A
9"
PLATFORM
TO ANTI TIP CLEAT