Specifications Sheet

NOTES
MONOGRAM 30" PIZZA OVEN ZEP30FLSS
Product Specification Revised 1/18
47"
(119.4) min
30" (76.2) max
27 5/8" (70.2) min
cutout depth
4 11/16"
(11.9)
5" (12.7) max
10" (25.4) max
7/8"
(2.2)
30 1/4"
(76.8)
+
-
1/16"
5 1/8"
(13.0)
+
-
1/16"
28 1/4"
(71.7)
+
-
1/16"
+
-
1/16"
1"
(2.5)
INSTALLATION
FRONT VIEW
INSTALLATION
SIDE VIEW
ELEC
Solid enclosure required
on the top, bottom, left and
right sides and back of oven
Allow
1 3/16" (3.0)
min
for overlap of oven top
and bottom over edges of
cutout
Allow
5/16" (0.8) min
for overlap of oven over
side edges of cutout
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
C
E
B
A
D
CUTOUT FOR FLUSH MOUNT INSTALLATION — TRIM KIT REQUIRED
A
47" is the required
minimum installation
height. Oven may be
installed higher based
on owner preference.
B
Extended depth
cabinet is required.
Drywall is acceptable
as back enclosure.
C
Platform must be
able to support 200
lbs (90 kg)
D
Solid enclosure
required on the top,
bottom, left and right
sides and back of
oven
E
Junction box location
(May also be located
in adjacent cabinet)
This pizza oven is
intended for indoor
installation only.