Owner's Manual

8 31-11062 Rev. 3
Installation Instructions
1 E
TETHER INSTALLATION (Required if installed without trim kit)
Use a drill with 1/8” drill bit to drill a pilot hole for the 1” drywall screw. Screw is installed 3” from cabinet front face
and centered horizontally. Attach the tether to the enclosure bottom using the provided 1” drywall screw. The free
end of the tether will be secured to the hearth oven case in step 3.
Hearth Oven Cutout
Tether
3” (76.2)
1” drywall screw
WITHOUT TRIM KIT
1 D
INSTALLATION OVER A WALL OVEN
NOTE: Install the oven only with specific models listed on the label on top of the oven.
WITHOUT TRIM KIT
Cutout per
Hearth Oven
Requirements
(See
1 A
)
Cutout per
Wall Oven
Requirements
C
L
C
L
29 15/16”
(76.4) min.
7 1/8”
(18.1) min.
WITH TRIM KIT
29 15/16”
(76.4) min.
Cutout per
Wall Oven
Requirements
Cutout per
Hearth Oven
Requirements
(See
1 B
)
C
L
C
L
2 3/16”
(5.6) min.