Owner`s manual

Care and Cleaning
Wine Reserve
Unplug the wine reserve before cleaning. If the unit is in a built-in location,
remove power at the circuit breaker.
Light bul!)
_zq)lacement
Unplug the wine reserve before replacing To remove tire light shield, push in the tab
the light bulb. If the unit is in a built-in on the left side of the shield and lower it.
location, remove power at the circuit breaker. Replace with a 15 watt appliance bulb.
In the event
o/apowe
failure
If the power fails, open the door as
infrequently as possible to maintain
the mmperamre. A gradual rise ill
temperature should not have any
adverse eff>ct on the wine.
If it is extremely hot, you may want to move
the wine to the coolest location you carl
find until power is restored.
Do not store or ttse gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
Secure all loose items such as drawers by
taping them securely ill place to prevent
damage.
Be sure the wine reserve stays in an upright
position during moving.
12