Specification Guide

NOTES
Product Specification Revised 7/16
ZDWR240HBSMONOGRAM WINE RESERVE
INSTALLATION
34 1/2"
(87.7)
Min
underside of
counter to floor
35" (89) Max
24"
(60.1)
min cutout depth
FLUSH CUTOUT INSTALLATION
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW
10 1/2" (26.7)
1 1/2" (3.8)
23 3/4" (60.3) Min
cutout width
9" (22.9)
Max
ELECTRIC
ZDBC240NBS
The cutout depth must
be 24".
The cutout dimensions
shown allow for a full
door swing and access
to the pull-out racks
when installed as a
built-in.
• The wine reserve can
be free-standing.
Note: If installing between
frameless cabinets, a 1/2"
wide filler strip or side
panel may be required.
The filler strip will act as
a spacer between the
door case and adjacent
cabinet and will prevent
interference with cabinet
door swing. The width of
the opening must include
filler panels.
• Wine reserve is
vented at the front
toekick to allow
built-in undercounter
installation.