Specification Guide

NOTES
INSTALLATION
GE Monogram
®
Wine Reserve
1/8"
(0.3)
Cut the notch
1/8" (0.3) deep, 1/4" (0.6)
wide and 1/4" (0.6)
high
GLASS
23 1/8"
(58.7)
2 1/4"
(5.7)
2 1/4" (5.7)
wide
all sides
18 5/8"
25 1/4"
2 1/2"
(5.1)
2 1/4"
(5.7)
1/4"
(0.6)
1/4"
(0.6)
30"
(76.2)
Route the
back side
of the
opening
7/16" (1.1) deep,
1 1/8" (2.9) wide
Route the
back side
of the
opening
7/16" (1.1) deep,
1 1/8" (2.9) wide
GLASS
23 1/8"
(58.7)
2 1/4"
(5.7)
2 1/4" (5.7)
wide
all sides
18 5/8"
(47.3)
2 1/4"
(5.7)
2 1/4"
(5.7)
29 3/4"
(75.6)
25 1/4"
(64.1)
CUSTOM PANEL
OPTION 1
CUSTOM PANEL
OPTION 2
ZDBI240WII, ZDWI240WII
10 1/2" (26.7)
1 1/2" (3.8)
23 3/4" (60.3) Min
cutout width
9" (22.9)
Max
ELECTRIC
34 1/2"
(87.7)
Min
underside of
counter to floor
35" (89) Max
24"
(60.1)
min cutout depth
FLUSH CUTOUT INSTALLATION
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW
Product Specification Created 7/14
ZDWI240HII
The cutout depth must
be 24"
The cutout dimensions
shown allow for a full door
swing and access to the pull-
out racks when installed as
a built-in.
• The wine reserve can be
free-standing.
Note: If installing between
frameless cabinets, a 1/2"
wide filler strip or side panel
may be required. The filler
strip will act as a spacer
between the door case and
adjacent cabinet and will
prevent interference with
cabinet door swing. The
width of the opening must
include filler panels.
• Wine reserve is vented at
the front toekick to allow
built-in undercounter
installation.