Design Guide with installation Instr cti Wine Chiller, Wine Reserve and Beverage Center monogram.
Safet Information BEFORE YOU BEGIN: _WARNINGS: Read these instructions completelg and carefullg. • Use this appliance only for its intended purpose. • Immediately repair or replace electrical service cords that become frayed or damaged. Unplug the unit before cleaning or making repairs. Repairs should be made by a qualified service technician. IM PORTANT - Save these instructions for local inspector's use. IM PORTANT -Observe all codes governing and ordinances.
Desi n Guide THE INSTALLATION SPACE THE INSTALLATION SPACE (cont.) ................................. ....................... Installation Dim.A / ] Filler panel or cleat to be set back even with front of case. 34-I/2"-35" _ Front edge of product case CABINET CABINET I Frontface * / "23-3/4" Min. Standard *'24-1/4" Min. StainlessSteelFlush **'24-3/4" Min.
Desi n Guide SIDE-BY-SIDE INSTALLATIONS Increase storage capacitg by installing two Monogram beverage centers, wine chillers or wine reserves together. Or,for a complete refreshment center, install ang two of these units together. • A side-bg-side installation requires at least a 47-!/2"wide minimum opening for standard installation and a 48-1/2"-wide minimum opening for flush installation of stainless steel models.
Installation Instructions TOOLS REOUIRED STAINING WOOD DRAWER FRONTS • #2 Phillips screwdriver • Adjustable wrench The drawer fronts are unfinished cherry wood. During use, oil from hands may accumulate and stain the wood. The drawer fronts may be stained and sealed to match adjacent cabinetry. The tinted glass will make the stained wood appear darker. A true color match can be seen only when the door is opened. Apply the stain and sealer according to the manufacturer's instructions.
Installation Instructions iSTEP 2 i REVERSE DOOR SWING SKIPTHIS STEPIF DOOR SWING SUITSTHE INSTALLATION Install 3 Hinge_ Screws! Parts Included: • Top left case hinge • Bottom left case hinge • Left and right side decorative hinge cover Decorative hinge screw hole cover Torx®driver bit W I Top Hinge Remove Hinge Pinand Bracket Tools Required: • Phillips screwdriver • Electric drill Remove the door: • Flatten the shipping carton to use as a pad. • Remove the 2 screws and the toekick.
Installation Instructions [STEP 3] LEVEL CUSTOM FRAME PANEL MODELS • Use an adjustable wrench to turn the leveling legs and raise or lower the product. • Adjust carefully; the product should be level and plumb with cabinetry, and should align with adjacent toekick height. Model ZDWI240WIIand ZDBI240WII Thesemodels require a custom panel frame surrounding the glass.Thereare two options:the panel maUbe 29-3//4" or 30"high.
TEMPLATE FOR NAMEPLATE LOCATION CutonDottedLine UpperLeft Cornerof Glass if Hinge is on Left A Topof GlassDoor Topof Badge..................... ! Upper Right Cornerof Glass if Hinge is on Right = = = = i i i DoorFrameSide DoorFrameSide DOORNAMEPLATELOCATION To position nameplate: • Cut template along dotted line. • Hold or tape template behind glass door so that it is visible from the front side. • Remove backing from nameplate.
