ZDT985SIN ZDT925SSN ZDT925SIN ZDT985SSN ZDT925SPN ZDT985SP

11
Using the Dishwasher
Dishwasher
Leak
Protection
If a leak is detected, the dishwasher will drain
and the cycle will stop. The display will show
“LEAK DETECTED”. Contact us for service.
Use a Rinse
Agent
High quality rinse agents such as Cascade
®
Platinum™ Power Dry™ Rinse Aid or
Finish
®
Jet-Dry
®
Rinse Aid are designed
for great drying action and to protect against
spots and film build-up on your dishes, glasses,
flatware, cookware, and plastic.
Filling the Dispenser
The rinse agent dispenser holds 3.5 oz. (104
ml) of rinse agent. Under normal conditions,
this will last approximately one month -
depending on setting.
1
Make sure the dishwasher door is fully open.
2
Open the Rinse Agent dispenser door.
3
Slowly add rinse agent until the cup is full. You
may need to pause several times to allow rinse
aid to settle. NOTE: Indicator window does
not light up.
4
Clean up any spilled rinse agent with a damp
cloth to prevent foam from forming inside the
dishwasher.
5
Close the Rinse Agent dispenser door.
Rinse Aid Setting
The amount of rinse agent released into the final
wash can be adjusted. If water drops or hard
water spots remain on dishes after the dry cycle,
increase the setting.
To adjust the setting
Open the Rinse Agent dispenser door; then turn
the adjuster clockwise to increase the amount
of rinse agent, counterclockwise to reduce the
amount of rinse agent.
Indicator
window
Rinse
agent
adjuster
Clockwise to
reduce water
drops and hard
water spots
Counterclockwise
to reduce foaming
49-4000215 Rev. 2