Installation Instructions

Installation Preparation
3
PARTS SUPPLIED IN
INSTALLATION PACKAGE:
• Junction box cover and #10 hex-head screw
• Hose clamp
• Drain hose (approximately 58” long)
• Drain hose hanger
• 1 top trim piece (on some models)
• 2 side trim pieces
• 2 mounting brackets for wood countertops
or side cabinets
• 2 #8-18 x 5/8” Phillips special head screws,
to secure dishwasher to underside of
countertop or to side cabinets
• Plug buttons
• Literature, samples and/or coupons
TOOLS YOU WILL NEED:
• Phillips-head screwdriver
• 1/4” and 5/16” nutdriver
• 6” Adjustable wrench
• Level
• Carpenter’s square
• Measuring tape
• Safety glasses
• Flashlight
• Bucket to catch water when flushing the line
• 15/16” socket (optional for skid removal)
• Gloves
• Pliers
For New Installations Only:
• Tubing cutter
• Drill and appropriate bits
• Hole saw set
MATERIALS YOU WILL NEED:
• 90° elbow (3/4”hose internal thread on one
end,opposite end sized to fit water supply)
• UL-listed wire nuts (3)
• Masking Tape
Materials For New Installations Only:
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• Electrical cable or Power Cord Kit WX09X70910 (5.4 Ft)
or WX09X70911 (7.9 ft) depending on your installation.
• Hose clamp (if needed for optional drain hose)
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Hot Water Line–3/8” minimum, copper tubing
(including ferrule, compression nut) or GE Appliances
Part # WX28X326, flexible braided hose.
• WD24X10065 drain hose (12’ long), if needed.
Hole Saw Set
Measuring Tape
Tubing
Cutter
Drill and Bits
Phillips-Head
Screwdriver
15/16” Socket
1/4” and 5/16”
Nutdriver
Flashlight
Gloves
Carpenter’s
Square
Safety Glasses
Level
Pliers
Strain Relief
Optional
12' Drain Hose
WD24X10065
Waste Tee
Wire Nuts (3)
90°Elbow
Hand
Shut-Off
Valve
Air Gap
Masking Tape
Electrical Cable
(or Power Cord,
if applicable)
Hot Water Line
Hose Clamp
Coupler for
optional
drain hose
6” Adjustable
Wrench
Bucket
Drain Hose
Drain Hose Hanger
Junction
Box Cover
Literature
Top Trim Piece
(on some models)
Side Trim Pieces
Plug Buttons
#8 Phillips
Special
Head Screws
5/8" long
Hose Clamp
Mounting
Brackets
#10 Hex-Head
Junction Box
Screw 1/2" long