Owner`s manual

Installation
Pro/essional Ranges
Before moving the range indoors:
• Remove outer carton and packing material
from the shipping base.
DoorHingeRoller
(Closed}
_/ KickPanel
• Remove the kick panel by removing 2 screws
at the top and pulling forward.
Remove oven doors:
• Open the door fully and hold down.
• Close the brass hinge latches to locked
position on each side.
• Carefully, lift and pull the door away from the
range and out of" the frame.
left RearShipping
Screws
RangeMust
beUniformly
Supported
onBraces
The range is secured m the skid with 2 bolts in
the front and 2 "L" brackets on the bottom
flange of the range back. Remove bolts and
"L" brackets.
Due to the weight of these ranges, use a dolly
with soft wheels to move this range.
• Lift the range onto the dolly and move
indoors.
To simplify handling and to reduce the weight
of the range:
• Remove the grates and drawers below the
knobs.
• Remove grill and griddle covers. DO NOT
ATTEMPT TO REMOVE A GRILL OR
GRIDDLE ASSEMBLY
• Remove the broiler pans/literature package
from inside oven (s).
8