Quick Specification
Product Specication Revised 1/22PAGE 3 OF 3
For questions about your 
appliance, please call 1-800-626-2000.
ZDOD240PSS
34 1/2" 
(87.6) 
Min
underside of
counter to floor
35" (88.9) Max
24" (61.0)
min cutout depth
CUTOUT INSTALLATION
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW
ELECTRIC
10 1/2" (26.7)
1 1/2" (3.8)
9" (22.9)
Max
24 1/4"
 (61.6) Min
Flush Inset
23 3/4" (60.3) Min
cutout width
CABINET CABINET
Dim. A
Front Edge of
Product Case
Front Face
Standard
Installation
110º
120º
In a standard installation, the 
product will project forward of 
adjacent cabinets. See Dim. A.
23 3/4" min.
CABINET CABINET
These products will fit flush to adjacent 
cabinets when installed with a Dim. A - width 
filler panel or cleat. The filler panel should be 
recessed or set back behind the door and 
even with the front edge of the product case.
110º
120º
Flush
Installation
Filler panel or cleat to be set
back even with front of case.
Front Edge of
Product Case
Dim. A
Front Face
24 1/4" min. width
stainless steel models
PRODUCT DIM. A
ZDWI240, ZDB1240 1"
ZDWR240, ZDBR240 1"
ZIB1240, ZIF1240 1"
ZIFS240, ZIBS240 1/4"
ZDOD240 1-1/4"
PRODUCT DIM. A
ZDWI240, ZDB1240 2"
ZDWR240, ZDBR240 1-3/4"
ZIFS240, ZIF1240 1-5/8"
ZDOD240 1-7/8"
ZIB1240, ZIBS240 2-5/8"
REFRIGERATION MODULES, TOP VIEW
INSTALLATION NOTES
• Installation Space 
This product can be installed as a 
built-in or used free-standing. The 
top canopy can be removed for 
installation below a countertop.
• Do not operate these products 
in temperatures below 45°F or 
above 120°F.
• If the refrigerator is used outdoors, 
plug the power cord into a GFCI 
receptacle.
• For a standard installation of 
Stainless Steel unit: The product 
must be installed so that the front 
face will project 1 7/8" forward of 
adjacent cabinets.
• For a ush installation of Stainless 
Steel unit: Install a 1 1/4" wide 
ller strip on the hinge side. The 
width of the opening must be 24 
l/4" min. wide. See installation 
instructions for details.
• Location Requirements All 
Monogram Refrigeration Modules 
may be closed in on the top 
and sides as long as the front is 
unobstructed for air circulation and 
door swing.
INSTALLATION CUTOUT 
SIDE VIEW
INSTALLATION CUTOUT 
FRONT VIEW



