Specification Sheet

Product Specication Revised 10/19PAGE 3 OF 4
For questions about your
appliance, please call 1-800-626-2000.
1/8"
(0.3)
Cut the notch
1/8" (0.3) deep, 1/4" (0.6)
wide and 1/4" (0.6)
high
GLASS
23 1/8"
(58.7)
2 1/4"
(5.7)
2 1/4" (5.7)
wide
all sides
18 5/8"
25 1/4"
2 1/2"
(6.4)
2 1/4"
(5.7)
1/4"
(0.6)
1/4"
(0.6)
30"
(76.2)
Route the
back side
of the
opening
7/16"
(1.1) deep,
1 1/8" (2.9) wide
Route the
back side
of the
opening
7/16" (1.1) deep,
1 1/8" (2.9) wide
GLASS
23 1/8"
(58.7)
2 1/4"
(5.7)
2 1/4" (5.7)
wide
all sides
18 5/8"
(47.3)
2 1/4"
(5.7)
2 1/4"
(5.7)
29 3/4"
(75.6)
25 1/4"
(64.1)
CUSTOM PANEL
OPTION 1
CUSTOM PANEL
OPTION 2
ZDBI240WII, ZDWI240WII
34 1/2"
(87.6)
Min
underside of
counter to floor
35" (88.9) Max
24"
(61.0)
min cutout depth
CUTOUT INSTALLATION
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW
10 1/2" (26.7)
1 1/2" (3.8)
9" (22.9)
Max
ELECTRIC
24 3/4" (62.9) Min
Flush Inset
23 3/4" (60.3) Min
cutout width
CABINET CABINET
Dim. A
Front Edge of
Product Case
Front Face
Standard
Installation
110º
120º
In a standard installation, the
product will project forward of
adjacent cabinets. See Dim. A.
23 3/4" min.
CABINET CABINET
These products will fit flush to adjacent
cabinets when installed with a Dim. A - width
filler panel or cleat. The filler panel should be
recessed or set back behind the door and
even with the front edge of the product case.
110º
120º
Flush
Installation
Filler panel or cleat to be set
back even with front of case.
Front Edge of
Product Case
Dim. A
Front Face
24" min. width
stainless steel models
INSTALLATION NOTES
• Installation Space
e Monogram Beverage Center may
be installed beneath a countertop or
can be used free-standing.
INSTALLATION CUTOUT
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW