Specifications

– 11 –
8. Release the door latch and allow the control
panel cover to hang against the dishwasher
door.
9. Disconnect the ground wire from the timer.
10. Disconnect the connectors. (Refer to mini-
manual or schematic diagram on page 39 for
reconnection.)
Note: When installing the timer, it is important to
align the threaded holes (A) and (B), marked in
steps 3 and 4, with holes (A) and (B) in the control
panel
Timer
Control Panel
White Connector
Threaded Hole (A)
Threaded Hole (B)
B
A
Align the threaded holes
marked in steps 3 and 4
with the holes in the
control panel.