Owner`s manual

MAKING ELECTRICAL CONNECTIONS
• Locate the Refrigerator’s AC Input and Output
connectors to the upper right of the evaporator
housing.
• Disconnect the refrigerator’s AC Input and Output
connectors from each other.
NOTE: If possible, try to avoid exposing the wires
attached to the refrigerator’s AC connectors.
• Connect the switchbox AC Input connector
to the refrigerator’s AC Input connector.
• Connect the switchbox AC Output connector
to the refrigerator’s AC Output connector.
• Locate the refrigerator’s DC Input and Output
connectors to the lower right of the evaporator
housing.
• Disconnect the refrigerator’s DC Input and Output
connectors from each other.
• Connect the switchbox DC Input connector
to the refrigerator’s DC Input connector.
• Connect the switchbox DC Output connector
to the refrigerator’s DC Output connector.
• Route the switchbox wires through the wire straps
already attached to the evaporator housing.
Arrange the connectors as far back in the
refrigerator as possible. If necessary, use
the wire ties included with the kit to dress
the wires.
• Cover any exposed wiring on the refrigerator
connectors with UL approved electrical tape.
WARNING: No wires are to be exposed.
Installation Instructions
Refrigerator
AC Connectors
Refrigerator
AC Connectors
Kit AC Output
Connector
(3 prongs)
Kit AC Input
Connector
(3 holes)
9
Kit DC Output
Connector
(2 prongs)
Kit DC Input
Connector
(2 holes)
Kit DC Connectors
Refrigerator DC Connectors
Kit AC
Connectors