Specification Sheet
For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
OVERALL DIMENSIONS
Product Specication Created 10/19PAGE 2 OF 4
*84"
(213.4)
48" (121.9)
23 1/2" (59.7)
2 5/8"
(6.7)
*83 1/2"
(212.1)
47" (119.4)
Case width
28 5/8"
(72.7)
TOP VIEW
ZISP480DXSS
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 4 5/8" (11.7) min
clearance to a wall for 90˚
door swing
** Allow 4 5/8" (11.7) min
clearance to a wall for 90˚
door swing
** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
full 130° door swings for pan removal. If the 90° door stop position is used, pan access is
maintained, but pan removal is restricted.
25 3/4" (65.4)
11 3/16"
(28.4)
*72 5/16"
(183.7)
*29 9/16"
(75.1)
*38 3/4"
(98.4)
34 7/16"
(87.5)
*3 7/8"
(9.8)
Allow **Dim A
min clearance
for door swing
Allow **Dim B
min clearance
for door swing
Door
Angle
90°
115°
130°
**Dim A
2 15/16" (7.5)
10 1/4" (26)
13 13/16" (35.1)
**Dim B
2 15/16" (7.5)
13 9/16" (34.4)
18 15/16" (48.1)
SPECIFICATIONS
Overall Width 48" (121.9 cm)
Overall Height 84" (213.4 cm)
Overall Depth 26 1/8" (66.4 cm)
Door Clearance 28 5/8" (72.7 cm)
Cutout Width 47 1/2" (120.7 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61.0 cm)
Plumbing Requirements 1.4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 800 lb
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or
circuit breaker is recommended. Install a properly
grounded 3-prong electrical receptacle recessed into
the back wall.