Installation Instructions
CertainTeed Vinyl Siding Installation Guide
53
Lineals over Horizontal Siding
Capping a Lineal Used as a Rake Board
Cut a section of lineal equal in 
length to the face of the lineal. 
This dimension is dependent on 
the rake angle.
Using PVC cement primer 
and cement on both pieces, 
slide the part into the lineal 
to create an assembly.
Apply the assembly to the wall and 
secure it, nailing as necessary.
Hand punch horizontal 
siding (locking area has been 
removed). Siding panel locks 
into dual undersill trim.
Butt dual undersill trim 
upward against the bottom 
of the flashing
dual undersill trim
new construction 
starter strip
flashing
5" lineal










