Installation Instructions

CertainTeed Vinyl Siding Installation Guide

Fasteners must penetrate a nailable surface at least 3/4".

Be sure to leave up to 1/16" between the fastener and the

panel nailing ﬂange. If you’re using a power stapler, drive the

staple perpendicular to the nailing slot with one leg of the staple

centered in the slot and the other leg above the panel.

NOTE: Check with local building codes to verify fastener

requirements for your area.

Nail Spacing and Product Expansion

and Contraction

It’s normal for vinyl building products to expand and contract with

temperature changes. To ensure a successful siding installation,

you must allow for this movement during application.

See the following charts for more information.

Product