Manualshelf

Quick Specs

ManualsBrandsMonogram Appliances ManualsAppliances36 Inch Counter Depth French Door Refrigerator, in Panel Ready
12345678910
MONOGRAM 36" BUILT-IN FRENCH-DOOR BOTTOM-FREEZER ZIP360NH
Product Specification Revised 1/18
FLUSH INSTALLATION
ZIP360NH
39" (99.1) Flush inset width
37 1/2" (95.3)
Width between cleats
6"
(15.2)
4 1/16"
(11.0)
7"
(17.8)
7"
(17.8)
10"
(25.4)
3/4" (1.9)
Width of side cleats
5 3/8" (13.7)
1/2" (1.3)
26 3/16" (66.5)
Flush inset depth
20 13/16" (52.9)
Depth to cleat
3 1/2"
(8.9)
75 1/2"
(191.8 )
From floor
to bottom
of electrical
area
ELEC.
FRONT VIEWSIDE VIEW
TOP VIEW
WATER
3 1/2"
(8.9)
W
Finished cleats
Finished cleats
Case Trim
1/2" Panel
Case
Door
85"
(215.9)
85"
(215.9)
NOTES
A
Mounting the junction box in this
location will also allow for front
accessibility through access
panel.
B
Water supply area
A
B
FLUSH INSET INSTALLATION 1/2" PANELS
ANTI-TIP BRACKET
WARNING:
The refrigerator is top heavy and
must be secured to prevent the
possibility of tipping forward.
Failure to do so may result in death
or serious injury.
The information below is for cabinet
design only. When installing the
anti-tip system you must use the
product installation instructions.
The information below applies to
all installation constructions:
• A wall bracket, bolts and toggles
will be supplied with the unit.
• The bolts will be used to attach
bracket to wall in 4 locations. Two
of the locations must penetrate
the center of the wall studs.
• The toggles are used for stability
in drywall and when metal studs
are encountered. Lag bolts are
used in wood studs.
• In installation opening, measure
81-1/2" from floor and draw a
horizontal line.
• Locate and mark the wall studs on
horizontal line. Verify at least two
studs have their centerlines within
the center 32-1/2" of installation
opening to ensure 2 wall studs are
penetrated.
• The bracket will be centered left to
right in opening with bottom of
bracket on the horizontal line.
• When unit is placed in opening,
the bracket tabs will align with
openings in back of the unit. The
unit will be secured to the bracket
using supplied “L” bolts.
See Installation Instructions for
detailed instructions.
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
81 1/2"
(207.0)
Use two
additional hole
locations at end
of brackets
Wall
Studs
Bracket
mounted
into vertical
wall studs
centered
within the
cutout
C
Ensure holes
selected are
centered on
the studs
L
FRONT VIEW OF CUTOUT
WITH ANTI-TIP BRACKET
FLUSH INSET
INSTALLATION