Quick Specs

MONOGRAM 36" BUILT-IN FRENCH-DOOR BOTTOM-FREEZER ZIP360NH
Product Specification Revised 1/18
NOTES
3/4" RAISED GRILLE PANEL ROUTING
3/4" RAISED FREEZER DRAWER PANEL ROUTING
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required. For 3/4" raised
panels, routing is required. The router
depth is 1/4" all the way around
the panel’s backs. Additional panel
width reductions are required per
the diagrams shown. This will create
“picture frame’ routing allowing the
panels to slide into the attached door,
drawer and grille trims.
Maximum total panel weight:
• Fresh food door panels – 30 lbs.
• Freezer drawer panel – 28 lbs.
• Grille panel – 11 lbs
Note: For panels constructed with
rails and stiles (5-panel), the rails
must be a minimum of 3” wide and
stiles must be a minimum of 4” wide.
Door Handles
Door handles not included. Custom
handles supplied by your cabinet
maker may be used.
ZKHFD2H: European tubular stainless
steel handles designed to fit 3/4"
panels. Kit includes three handles.
FLUSH INSET
INSTALLATION
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should be
finished as they may be visible
when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
Front
NOTE: Routed areas should be
finished as they may be visible
when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
3/4"
11/32"
1/4"
1/4"
1/4"
1/2"
DETAIL TOP
DETAIL BOTTOM
1/4"
DETAIL TOP
DETAIL BOTTOM
ROUTER DEPTH 1/4"
1 11/16"
2 1/16" 2 1/16"
ROUTER DEPTH 1/4"
ROUTER DEPTH 1/4"
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2 1/16" 2 1/16"
ROUTER DEPTH 1/4"
ROUTER DEPTH 1/4"
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE