Quick Specs

OVERALL DIMENSIONS
AFTER PANEL INSTALL
MONOGRAM 36" BUILT-IN FRENCH-DOOR BOTTOM-FREEZER ZIP360NH
Product Specification Revised 1/18
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall.
SPECIFICATIONS
Overall Width 38" (96.5 cm)
Overall Height 84 1/2" (214.6 cm)
Overall Depth 25 7/8" (49.5 cm)
Door Clearance 19 1/2" (49.5 cm)
Cutout Width 39" (99.1 cm)
Cutout Height 85" (215.9 cm)
Cutout Depth 26 3/16" (66.5 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 663 lb (300.7 kg)
38" (96.5)
10 13/16"
(27.5)
7/16"
(1.1)
20 5/8" (52.4)
25 7/8" (65.7)
*84 1/2"
(214.6)
*73 5/16"
(186.2)
*4"
(10.2)
SIDE VIEWFRONT VIEW
*83 1/2"
(212.1)
35" (89.0)
Case width
ZIP360NH
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** These refrigerators are equipped with a 2-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted.
**8"
(20.3)
19 1/2"
(49.5)
TOP VIEW
*115° Door swing
**8"
(20.3)
*26 3/8"
(70.0)
7/16"
(1.1)
†
Doors can be adjusted to
90° door swing
†
Allow 4" (10.2) min
distance to adjacent
wall from cutout
†
Allow 4" (10.2) min
distance to adjacent
wall from cutout
FLUSH INSET
INSTALLATION