Installation Instruction

17
31-46542-4
Installation Instructions
STEP 7 LEVEL REFRIGERATOR
All models have 4-point leveling. The front is supported
by leveling legs; the rear is supported by adjustable
wheels. Both are accessible from the front of the
refrigerator.
ŶTo level the back of the refrigerator, turn the 5/16”
hex nut located above the front wheels. Turn
counter clockwise to raise or clockwise to lower the
refrigerator.
ŶFor front leveling, use a 1-5/16” open-end wrench.
ŶAdjust height of refrigerator to match installation
cutout opening. The refrigerator should be level and
plumb with cabinetry.
NOTICE: The rear leveling wheels and front leveling
legs are limited to a maximum height adjustment of 1”.
If the installation requires more than 84-1/2” height, the
installer should elevate the refrigerator on a sheet of
plywood or runners. Cabinetry trim could also be added
across the top of the opening to shorten the opening.
If you attempt to raise the refrigerator more than 1”, you
will damage the front leveling legs and the rear leveling
wheels.
STEP 8 INSTALL TOEKICK AND
VENT
ŶLocate the toekick, vent and screws (removed
earlier).
ŶA custom toekick can be installed to match or
complement the surrounding cabinetry. Use the
supplied toekick as a template.
ŶReinstall the vent using the screws removed earlier.
ŶReinstall the toekick .
Up
Leveling Leg
Up
Hex Nut
Adjusts Rear
Wheels
Supplied Toekick
Vent Holes