Installation Instruction

12
31-46542-4
Design Guide
3/4” CUSTOM PANEL DIMENSIONS: 80” High Fully Integrated Installation
3/4” CUSTOM PANEL DIMENSIONS: 84” High Fully Integrated Installation
If you choose to install custom panels, they must be cut
to the dimensions shown. The panels will attach to the
door and drawers using a hook and bracket system.
EXTREMELY IMPORTANT: Custom wood panels
must be at least 3/4” thick where hooks and bracket
hardware are attached. Refer to Templates for hook
and bracket location.
NOTE: This product is designed to handle 3/4” panels
that are made of wood.
33-3/8” x 23” is the maximum opening for a
glass window. The opening may be smaller if
desired.
If you choose to install custom panels, they must be cut
to the dimensions shown. The panels will attach to the
door and drawers using a hook and bracket system.
EXTREMELY IMPORTANT: Custom wood panels
must be at least 3/4” thick where hooks and bracket
hardware are attached. Refer to Templates for hook
and bracket location.
NOTE: This product is designed to handle 3/4” panels
that are made of wood.
33-3/8” x 23” is the maximum opening for a
glass window. The opening may be smaller if
desired.
IMPORTANT NOTE: Maximum panel weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Drawer Panel: 9 lbs.
C Convertible Drawer Panel: 19 lbs.
IMPORTANT NOTE: Maximum panel weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Drawer Panel: 9 lbs.
C Convertible Drawer Panel: 19 lbs.
45-3/8”
33-3/8”
A
B
C
45-3/8”
7-1/2”
22-3/4”
PANELS FOR SOLID DOOR
AND DRAWERS
PANELS FOR SOLID DOOR
AND DRAWERS
PANELS FOR
GLASS DOOR
PANELS FOR
GLASS DOOR
* Styles must be a min 3-3/8” to cover
aluminum door frame.
* Styles must be a min 3-3/8” to cover
aluminum door frame.
Design Tip: Some amount of each panel will be visible on the interior side
of the unit. It is recommended that both sides of each panel be finished.
Design Tip: If using custom panels, a custom toe kick should
be considered. The Bottom of case is white.
Design Tip: Some amount of each panel will
be visible on the interior side of the unit. It is
recommended that both sides of each panel
be finished.
Design Tip: If using custom panels, a custom
toe kick should be considered. The Bottom of
case is white.
Routing of the panels is required where the hooks and brackets attach to the panels.
Routing of the panels is required where the hooks and brackets attach to the panels.
49-3/8”
33-3/8”
A
B
C
49-3/8”
22-3/4”
7-1/2”