Quick Specs

NOTES
ZDOD240HSSMONOGRAM OUTDOOR/INDOOR REFRIGERATOR
Product Specification Revised 1/18
INSTALLATION
ZDOD240PSS
34 1/2"
(87.6)
Min
underside of
counter to floor
35" (88.9) Max
24"
(61.0)
min cutout depth
CUTOUT INSTALLATION
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW
ELECTRIC
10 1/2" (26.7)
1 1/2" (3.8)
9" (22.9)
Max
24 1/4"
(61.6) Min
Flush Inset
23 3/4" (60.3) Min
cutout width
Installation Space
This product can be
installed as a built-in
or used free-standing.
The top canopy can be
removed for installation
below a countertop.
Do not operate
these products in
temperatures below
45°F or above 120°F.
If the refrigerator is
used outdoors, plug the
power cord into a GFCI
receptacle.
For a standard
installation of Stainless
Steel unit: The product
must be installed so
that the front face will
project 1 7/8" forward of
adjacent cabinets.
For a flush installation
of Stainless Steel unit:
Install a 1 1/4" wide
filler strip on the hinge
side. The width of the
opening must be
24 l/4" min. wide. See
installation instructions
for details.
Location Requirements
All Monogram
Refrigeration Modules
may be closed in on
the top and sides as
long as the front is
unobstructed for air
circulation and door
swing.
REFRIGERATION MODULES, TOP VIEW
PRODUCT DIM. A
ZDWI240, ZDB1240 1"
ZDWR240, ZDBR240 1"
ZIB1240, ZIF1240 1"
ZIFS240, ZIBS240 1/4"
ZDOD240 1-1/4"
PRODUCT DIM. A
ZDWI240, ZDB1240 2"
ZDWR240, ZDBR240 1-3/4"
ZIFS240, ZIF1240 1-5/8"
ZDOD240 1-7/8"
ZIB1240, ZIBS240 2-5/8"
CABINET CABINET
Dim. A
Front Edge of
Product Case
Front Face
Standard
Installation
110º
120º
In a standard installation, the
product will project forward of
adjacent cabinets. See Dim. A.
23 3/4" min.
CABINET CABINET
These products will fit flush to adjacent
cabinets when installed with a Dim. A - width
filler panel or cleat. The filler panel should be
recessed or set back behind the door and
even with the front edge of the product case.
110º
120º
Flush
Installation
Filler panel or cleat to be set
back even with front of case.
Front Edge of
Product Case
Dim. A
Front Face
24 1/4" min. width
stainless steel models