Specifications

Bx oven CLASSIC HAL range inc condenser 01/12 RAC

TEMPERATURE SET POINT/CHAMBER DISPLAY

Hold the P key (5), together with the STOP key (4) for 5 seconds.

or if already done for above setting, continue by

pressing start (3) - “dsp” is displayed

press (8) to change between “sp” = set point temperature displayed

or “ct” = chamber temperature displayed.

Pressing start (3) again sets the display back to normal operating mode.

PROGRAM “0” ENABLE (Temperature and time only control)

Hold the P key (5), together with the STOP key (4) for 5 seconds.

or if already done for above setting, continue by

pressing start (3) - “P0E” is displayed

press (8) to change to -0 (disable) or -1 (enable)

8 HOUR TIMER(20 minute warning of 8hrs of operation)

Hold the P key (5), together with the STOP key (4) for 5 seconds.

or if already done for above setting, continue by

pressing start (3) - “8HR” is displayed

press (8) to change to -0 (disable) or -1 (enable)