Specifications

Bx oven CLASSIC HAL range inc condenser 01/12 RAC
14
8.0 BX‘CLASSIC’ OPERATING INSTRUCTIONS
RUNNING PRE-SET PROGRAMS
REFER TO CONTROL PANEL (
SEE RIGHT)
1 Switch on power by pressing green
button (1).
2 Select required program using UP/
DOWN scroll keys (2).
3 Press START key (3) to begin bake cycle.
• Oven will heat to set temperature
and display will flash actual temperature.
• When set temperature is reached
the display will stop flashing. The oven is
now ready
4 Load product. Close door.
5 Press START key (3).
Display will show the following:-
(9) • Actual temperature.
(8) • Remaining bake time in minutes.
Display will automatically switch to show
remaining seconds during the last minute
of bake time.
At this time increase bake time if required.
Press time key (8), then up/down keys (2) to
add more time amount required. Press time
key (8) then start (3).
(7) • Steam time (if set) in seconds.
If the actual temperature is less than the
minimal steaming temperature of 125 C
then '--' will be displayed. This indicates
that steaming functions are inhibited.
(6) • Damper duration (damper open time) in
minutes.
(5) • Program number/bake cycle indicator.
Display will alternate between program
number and the spinning bake cycle
indicator.
6 Press STOP key (4) when
“bake over” alarm sounds
1
9
8
7
6
5
4
2
3