User`s manual

GLOBAL SETTINGS
89
external keyboard when changing track focus of the SFX-60MKII. No output data is gener-
ated for the auto track channel.
MORE ON THE MONOMACHINE MIDI FUNCTIONALITY
Some MIDI commands are accepted on all active channels:
• NRPN data is accepted to control the individual internal tracks
• PROGRAM CHANGE can be used for changing pattern
T
he NRPN interface doubles with the normal CTRL CHANGE interface of the Individual
Track Channels, and provide the same functionality. It is only accepted, never transmitted.
See Appendix B for full MIDI specifications of the NRPN interface.
PROGRAM CHANGE can be disabled for MIDI input and output. See section “CONTROL
OUT2”, on page 90 for more information.
The Monomachine SFX-6 joystick sends pitch-bend for right and left directions, CTRL
CHANGE 1 (mod wheel) for the upward direction and CTRL CHANGE 2 (breath control) for
the downward direction. The same messages are accepted by the SFX-60MKII as joystick
control.
• If the individual track channel is disabled you can still control the individual track
parameters using the NRPN interface.
CONTROL OUT1
This menu contains parameters that control how the Monomachine sends MIDI note and
control data.
1. Select the CONTROL in the GLOBAL menu. Then select CO
NTROL OUT1 using the
[ARROW] keys and press [ENTER/YES].
Navigate between the parameters using the [UP] and [DOWN] keys. Change the parame-
ter values using [LEFT] and [RIGHT].
SEQUENCER (sequencer) controls whether MIDI data of the sequencer should be sent to
the internal synthesizer tracks, MIDI OUT or both.
ARP (arpeggiator) controls whether MIDI data of the arpeggiator should be sent to the
internal synthesizer tracks, MIDI OUT or both.
KEYBOARD controls whether MIDI data of the keyboard and joystick (SFX-6 only) should
be sent to the internal synthesizer tracks, MIDI OUT or both. The keyboard on the SFX-60/
SFX-60 MKII is represented by the [TRIG] buttons when not in the GRID RECORDING or
LIVE RECORDING modes.