User`s manual

GLOBAL SETTINGS

1. Select the AUDIO in the GLOBAL menu. Then select MAST

ER TUNE using the

[ARROW] keys and press [ENTER/YES].

Use [UP]/[DOWN] keys to set the integer part, and [RIGHT]/[LEFT] keys to set the frac-

tion. The default value is 440.0 HZ.

GLOBAL ROUTING

In this menu one of three audio routing selections can be set.

1. Select the AUDIO in the GLOBAL menu. Then select ROUT

ING using the [ARROW]

keys and press [ENTER/YES].

Use [UP] and [DOWN] keys to move the focus, and confirm with [ENTER/YES].

3xSTEREO is the default configuration, where the three internal stereo mix buses AB, CD

and EF are sent to the audio outputs A/B, C/D and E/F.

3xSTEREO + AB=MIX, has the same function as mode 3xSTEREO described above, but

the CD and EF buses are mixed also to the A/B outputs, for users only using the A/B main

stereo outputs, or headphones.

6xMONO mixes the stereo output of each of the six Monomachine tracks to mono. The

tracks are then sent directly to each of the audio outputs. Track 1 is sent to output A, Track

2 to output B and so on.

Please see section “MONOMACHINE ROUTING”, on page 80 for detailed information on

the Monomachine routing possibilities.

CONTROL

The Monomachine is designed to fit well into a MIDI environment. It is well equipped for

ontrolling other units using the MIDI sequencer, the MIDI real-time messages (Timing