User`s manual

THE PATTERN SEQUENCER
50
TRACK PAGE COPY
In GRID RECORDING mode you can copy one page of trig data and paste it to another
page.
1. Make sure you are in GRID RECORDING mode, indicated b
y the <RECORD> LED giv-
ing off a steady light. Select the source track using the [TRACK] keys.
2. Select which page you want to copy by pressing the [SCALE SETUP] key.
3. When you have chosen the page you want to copy, hold the [SCALE SETUP] key and
press [REC]. The message “COPY PAGE” page will appear.
4. Select the pattern page you want to paste the copied
page into by pressing the [SCALE
SETUP] key. Paste the data by holding [SCALE SETUP] and then pressing the [STOP]
key. A message saying “PASTE PAGE” will be shown in the display
• Page copy operates on trigs, pitches and parameter locks. Pasting data into a
track overwrites any previous notes, data and parameter locks.
• The track page paste operation can be undone by holding down the [SCALE
SETUP] key while pressing the [STOP] key. A message saying ”UNDO PAGE” will
be shown in the display.
CLEAR TRACK PAGE
It is also possible to clear a track page.
1. Make sure you are in GRID RECORDING mode.
2. When you are on the track you wish to clear, press and hold [SCALE SETUP]. Then
press [PLAY] to clear the track. The message “CLEAR PAGE” will appear.