User`s manual

GLOBAL SETTINGS
102
• Pressing the [FUNCTION] while in the WAVEFORM NAME window key gives
access to the “high score” selection method, in which you see all characters at
the same time. Keep the [FUNCTION] key held while navigating using the
[ARROW] keys. Release the [FUNCTION] key, when you have located the letter of
your choice.
MIDI SEQ
Here relevant settings for the MIDI sequencer are found.
MIDI SEQ SETTINGS
The MIDI channels and CTRL-change parameters used per channel is set in this menu.
1
. Select the MIDI SEQ in the GLOBAL menu. Then select MIDISEQ SET using the
[ARROW] keys and press [ENTER/YES].
Use the [ARROW] keys for navigating in the window. Use LEVEL to update the parame-
ters.
TRK (track) is the MIDI sequencer track you are about to edit.
CH (MIDI channel) is where you assign on which MIDI channels the six MIDI sequencer
tracks send data.
CL1-4 (control change 1-4) controls which MIDI CC commands that should be availabe for
the MIDI sequencer track. In addition to CC 0-127, after touch (“AFT”) can be selected in
this column.