User`s manual

GLOBAL SETTINGS
95
ing on the positions you specify. If you specify KIT 03 and receive four kits, positions 3 to
6 will be written over no matter where the kits received were originally placed.
• VERF - T
he SYSEX data received is only verified to be correct, they are not stored in
memory. Using this method it is not possible to select any start positions in the WRITE
POS FROM window.
WRITE POS FROM (write start position) is only available when the SPEC method of
recieval is chosen. After selecting SPEC in the MODE tab, enter the WRITE POS FROM
tab using the [RIGHT] key, then use [RIGHT] and [LEFT] key to move between the param-
eters. Adjust the start positions parameters using the [UP] and [DOWN] keys or the LEVEL
knob.
To load sysex data into the Monomachine, follow the steps below:
1. Connect the Monomachine to the device you are receivi
ng the data from. See the figure
below for an example of what the connections could look like when sending sysex data
to a computer.
2. Select FILE row in the GLOBAL menu. Then select SYSEX
RECV and press [ENTER/
YES].
3. Select the receive method you want using the [UP] and [DOWN] arrow keys. If you have
chosen the SPEC option, specify the new start positions for the dump.
USB CORD
MIDI INTERFACE OUT
MIDI IN