User`s manual

GLOBAL SETTINGS
90 Monomachine SFX-6/60 USER’S MANUAL
number of the channels above decline down to the Base Channel as you
reduce the Channel Span.
INDIVIDUAL TRACK CHANNELS
If the Individual Track Channels are activated they will transmit and accept
note data control for the six Monomachine tracks. The internal sequencer,
the Data Entry pages, the Keyboard and Joystick (SFX-6 only) send note
and control data on the Individual track channels. This control data is also
accepted on the same channels.
• Parameter locks of the internal tracks are not transmitted over MIDI,
because the data transfer rate of the MIDI standard is too low for
delivering large number of control data in time.
• If the Individual Track Channels are disabled you can still control the
individual tracks using the NRPN interface. See section “Some MIDI
commands are accepted on all active channels:“ for more informa-
tion.
MULTI TRIG CHANNEL
The Multi Trig channel directly control the Multi Trig monophonic super-
synth functionality of the Monomachine. Please see section “MULTI TRIG”
on page 40 for more information.
Output data on this channel can only be generated on the SFX-6, from the
keyboard when Multi Trig Mode is selected.
MULTI MAP CHANNEL
The Multi Map channel directly control the Multi Map functionality as
described in section “MULTI TRIG” on page 40.
Output data on this channel can only be generated from the keyboard of the
SFX-6 when Multi Map Mode is selected.
AUTO TRACK CHANNEL
The Auto Track channel is a control channel that follow the track selected as
active on the Monomachine interface. It is very useful for the SFX-60 table-
top module, as an external MIDI-keyboard assigned to this channel can be
used for the functionality of the Keyboard of the SFX-6. It saves the work of
switching the channel on the external keyboard when changing track focus
of the SFX-60.
Monomachine Joystick control is accepted as pitch-bend for right and left
directions, CTRL_CHANGE #1 (mod wheel) for upward direction and
CTRL_CHANGE #2 (breath control) for downward direction.
No output data is generated for the Auto Track channel
ALL CHANNELS
Some MIDI commands are accepted on all active channels: