User`s manual

MONOMACHINE ROUTING
84 Monomachine SFX-6/60 USER’S MANUAL
MIX BUS ROUTING
For applying an effect to two or more mixed tracks you need to use the mix
buses as input for the FX machine. To use this mode, set track number two
or higher to use an FX machine, and set INPUT to “BUS XX”, where XX is
the mix bus AB, CD or EF.
When the output of a track in the Monomachine is set to AB, CD or EF, it is
feed to one of the three mix buses, which by default end in the audio outputs
with the same names. The tracks are mixed in the same order as their
index, with track 1 first.
The contents of the mix bus can be used as input for the FX machines at
any time. If the same bus is used for input and output, the FX is applied as
Insert. If another bus is used to output the FX output is mixed into the track
normally, just like synthesis machines.
In the example above all tracks but the third is assigned to the AB mix bus.
Track 5 is a FX machine, with INPUT and OUTPUT set to MIX AB. As the
output is the same as the input the FX is applied as Insert. What will happen
is that track 1, 2 and 4 will be mixed and effected by track 5. The output of
the effect will then be mixed with track 6 and sent to the AB outputs. Track 3
is sent by itself to the EF outputs, non-effected.