User`s manual

MONOMACHINE ROUTING
Monomachine SFX-6/60 USER’S MANUAL 83
All Track Effects, the LFO’s and the sequencer are still at your hands
when using the audio inputs! Set up six tracks with various Track
Effect settings, LFO settings and use the sequencer, and you have a
unique and powerful effects processor.
NEIGHBOUR ROUTING
The FX machines can also take their inputs from internal Monomachine
sound. One of the modes for this is the Neighbour mode. To use this mode,
set track number two or higher to use an FX machine, and set INPUT to
“NEIBOR”.
In Neighbour mode, the output of the previous track is used directly, and
feed into the input of the FX machine of the current track. Only the input of
one track is used for the input, but the neighbour FX machines can be
chained.
In the example above all audio outputs are set to the main AB mix bus.
Track 2 and 6 use a Track Effect set to neighbour mode, and the input is
taken directly from the previous track. All outputs are turned off for track 2
and 5 to make it an insert effect.
Neighbour is good for quick FX routing, when no more than one track need
to be feed into the FX.
Use the neighbour FX to get access to an additional Track Effect! If
you rather want the distortion to be applied after all other effects,
you can assign a Through FX machine in neighbour mode to the
track after, and all the Track Effects of the second track will be
applied after the first one. Just remember to turn off the outputs of
the first track!