User`s manual

MONOMACHINE ROUTING
82 Monomachine SFX-6/60 USER’S MANUAL
source sound externally. The source can either be the Audio Inputs, the
sound of the previous track or the audio of one of the Mix Buses.
The various uses of the FX Machines in combination with Synthesis
Machines are discussed in the following sections.
USING THE AUDIO INPUTS
The Audio inputs are reached through the FX Machines found in the Mono-
synth named “FX”. You will find it in the end of the Monosynth list in the
SYNTH tab of the EDIT KIT window. The “Thru” machine is a good starting
point as it will just let the audio from the source selected through without
other processing but a signal amplifier and of course the Track Effects.
After selecting the Through machine for a track, go to the INPUT parameter
and select INP A, INP B or INP AB. Please note that the INPUT parameter
field does not appear until an FX machine is selected with [ENTER/YES].
• INP A - Monophonic audio is used from Audio Input A.
• INP B - Monophonic audio is used from Audio Input B.
• INP AB - Stereo audio is used from Audio Input A and B.
Before any sound is heard from the audio input you need to trig the track so
the machine is activated. Play any note for the track; the pitch of the key is
ignored by the Through machine.
The output of the tracks always pass through the Track Effects, in which the
Amplifier Envelope is part. If you want the audio to pass through without
decaying you need to set Decay and Release to their maximum levels (127)
and retrig the machine.
In the routing example above Synthesis Machines are mixed with FX
Machines with input taken from the Audio Inputs. The Audio Inputs are
always available, but only printed explicitly in this example.