User`s manual

THE SONG SEQUENCER
Monomachine SFX-6/60 USER’S MANUAL 79
From here you can set the Song Row Mute mask for the song row. Use the
[TRIG] keys 1 to 6 to update the current Song Row Mute mask for the inter-
nal tracks, and [TRIG] keys 9 to 14 for the MIDI sequencer tracks.
Tempo adjustments can be programmed by setting a BPM value. Use the
LEVEL encoder to update the BPM setting. You need to start by increasing
the BPM-value to set it. To remove the BPM value, turn the LEVEL encoder
so that the lowest possible value is selected and “-” is printed in the BPM
tab.
If no BPM value is set for the step, the current tempo is used. If a song does
not have any tempo settings, the current tempo is used for the full song.
If a Song Row Mute mask is set for the row, it is indicated in the Song Extra
column with a bold “M”. If a Song Row BPM value is set, it is indicated in the
Song Extra column with a bold “B”.
• The global mutes applies as well as the Song Row Mutes. Tracks
muted in the either the global mutes as described in section “THE
MUTE MODE” on page 66 and the Song Row Mute mask will be
muted for the row.
SONG LOOPS AND JUMPS
Song loops and jumps are useful tools in composing the song structure.
To select a loop/jump, turn the LEVEL encoder in the Pattern column to let
the parameter value right before the A01-pattern, after the END indicator.
When a loop is selected the second edit column controls which row to loop
from. Use the LEVEL encoder to change what row to loop to. The third row
selects how many times the loop should be performed. Use the LEVEL
encoder to select the number of loops. The loop count can also be set to
infinity. Loops can be nested.
You can change the loop to be to a reference further on in the song. The
loop then becomes a jump and no loop count column is available.