User`s manual
ADDITIONAL SEQUENCER FEATURES
64 Monomachine SFX-6/60 USER’S MANUAL
for a 4/4 single speed pattern. If you are not quite sure what you are doing,
you are probably best off leaving the swing step settings at the default and
just change the swing amount.
When changing to double speed mode in scale setup (see page 51) you
need to modify the swing pattern to get the same result as was given by the
default swing pattern in single speed mode. In double speed mode, activate
swing for every fourth note, starting with the third note.
Please check figure ”Swing example” below for example on the swing effect
with different Swing Amount and Swing Track settings. The first eight steps
use the default “shuffle” setting, and the later eight use an edited Swing
Track setting.
• When the Monomachine is locked to external MIDI clock, the swing
amount will be quantised to the resolution of the MIDI clock, render-
ing only four swing amount zones.
• The Swing Track can be copy cleared and pasted using [FUNC-
TION]+[COPY]/[CLEAR]/[PASTE]
FIGURE 5. Swing example