User`s manual

ADDITIONAL SEQUENCER FEATURES
62 Monomachine SFX-6/60 USER’S MANUAL
By holding a [TRIG] key and using the [UP] and [DOWN] keys, you can
adjust the note offsets for the active steps. The current offset is displayed
while the [TRIG] key is held in a small popup-window in the lower left corner
of the LCD screen.
TRANSPOSE
Each track of the Monomachine (including the MIDI sequencer tracks) offer
transpose settings. Transposing notes means to move them to higher or
lower notes. Transposing in the Monomachine is made real-time and the
pattern data programmed is not affected.
The transpose window is called by pressing [TRANSPOSE] while holding
[FUNCTION]. Select which track you want to edit the transpose settings for
using the [TRACK] keys.
The transpose window is printed below:
• TRACK = TRACK TRANSPOSE
• PAT = PATTERN TRANSPOSE
The Track Transpose parameter is controlled with the upper left DATA
ENTRY encoder. It sets the individual track transpose for the track selected.
The Pattern Transpose parameter is controlled with the second DATA
ENTRY encoder on the first row. It controls the transpose setting for the full
pattern. This parameter is the same for all tracks.
On the row below you will find two labels named “SCALE” and “KEY”. Move
the inverted focus square with the [LEFT] and [RIGHT] keys, and adjust the
settings with [UP] and [DOWN]. The Key parameter is only available for cer-
tain selections of Scale, see below.